Microchip MPFS460T handleiding
Handleiding
Je bekijkt pagina 6 van 61
FlashPro Express User Guide
5
Within the Single Device Configuration Window there is a field STAPL_FILE_NAME, which displays
the location of the STAPL file loaded.
3.
Switch the project to chain mode by one of the two methods:
a.
Press the chain button from the toolbar.
b.
From the Tools menu, select Mode->Chain Programming.
4.
Load the STAPL file in chain mode by adding a Microsemi device in the chain.
a.
From the File menu, select Configuration->Add Microsemi Devices from Files.
b.
Browse to the location of the STAPL file and click Open.
5.
To save the project, from the File menu, select Save Project.
6.
You may now open the project using FlashPro Express.
When moving FlashPro project (*.pro) files to another machine, Microsemi recommends that you archive the
entire project folder, copy it to the new machine, extract it locally, then load the job project within FlashPro
Express. FlashPro Express will only open a job project if a programmer is connected to the machine, at least one
Microsemi device has programmed enabled, and all enabled Microsemi devices have a bitstream file loaded.
Bekijk gratis de handleiding van Microchip MPFS460T, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microchip |
| Model | MPFS460T |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10235 MB |
