Microchip MPFS250TS handleiding
Handleiding
Je bekijkt pagina 35 van 61
FlashPro Express User Guide
34
Error Code Exit Message Possible Cause Possible Solution
JTAG pins
DEVRST_N is tied to LOW
outside of Microsemi specifications. See your
device datasheet for more information on
transient specifications.
Monitor JTAG supply pins during
programming; measure JTAG signals for noise
or reflection.
Tie DEVRST_N to HIGH prior to programming
the device
0x8004 Failed to verify IDCODE
Incorrect programming file
Incorrect device in chain
Signal integrity
issues on JTAG pins
Choose the correct programming file and select
the correct device in the chain.
Measure JTAG pins and noise for reflection. If
TRST is left floating then add pull-up to pin.
Reduce the length of Ground connection.
0x8005
Failed to verify IDCODE
RT4G150_ES
STAPL file is not
compatible with
RT4G150 production
devices. You must use
a STAPL file for
RT4G150
device.
Programming file is for
RT4G150_ES and
device is RT4G150
Incorrect
programming file
Incorrect device in
chain
Signal integrity
issues on JTAG pins
Generate a programming file for RT4G150
device
Choose the correct programming file and select
the correct device in the chain.
Measure JTAG pins and noise for reflection. If
TRST is left floating then add pull-up to pin.
Reduce the length of Ground connection.
0x8006 Failed to verify IDCODE
RT4G150
STAPL file is not
compatible with
RT4G150_ES
devices. You must use a
STAPL file for
RT4G150_ES
device.
Programming file is
for RT4G150 and
device is
RT4G150_ES
Incorrect
programming file
Incorrect device in
chain
Signal integrity
issues on JTAG pins
Generate a programming file for
RT4G150_ES device
Choose the correct programming file and select
the correct device in the chain.
Measure JTAG pins and noise for reflection. If
TRST is left floating then add pull-up to pin.
Reduce the length of Ground connection.
0x8007 Failed to verify FPGA
Array
Device is programmed
with a different design or
the component is blank.
Unstable voltage level.
Signal integrity
issues on JTAG pins.
Verify the device is programmed with the
correct data/design.
Monitor related power supplies that cause the
issue during programming; check for transients
outside of Microsemi specifications. See your
device
Bekijk gratis de handleiding van Microchip MPFS250TS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microchip |
| Model | MPFS250TS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10235 MB |
