Microchip MPFS160TS handleiding
Handleiding
Je bekijkt pagina 42 van 61
FlashPro Express User Guide
41
Error
Code
Exit
Code
Exit Message Possible Cause Possible Solution
0x801C -20 Fabric configuration
segment digest
verification: FAIL
Programming bitstream
components do not match
components programmed.
Fabric configuration segment
data has been corrupted or
tampered with
Use the same programming file that was
used to program the device.
0x801D
0x801E
0x804B
-21
Device security
prevented operation
The device is protected with
user pass key 1 and the
bitstream file does not contain
user pass key 1.
User pass key 1 in the
bitstream file does not match
the device.
Run DEVICE_INFO to view security
features that are protected.
Provide a bitstream file with a user pass
key 1 that matches the user pass key 1
programmed into the device.
0x801F
0x8020
0x8040
-22 Authentication Error
Bitstream or data is
corrupted or noisy
eNVM has been locked by a
master in your design
Running VERIFY action on a
blank device.
Release the lock on the eNVM after your
master has completed its access
operations. Write 0x00 to "REQACCESS"
register in eNVM Control Registers
(address 0x600801FC) to release the
access,
Bitstream file has been
corrupted
Bitstream was incorrectly
generated
Program the device prior to running
VERIFY action
Regenerate bitstream file.
0x8021
0x8022
-23 Authentication Error
Invalid/Corrupted
encryption key
File contains an encrypted key
that does not match the
device
Attempting to erase a device
with no security using master
security file
File contains user encryption
key, but device has not been
programmed with the user
encryption key
Device has user encryption
key 1/2 enforced and you are
attempting to reprogram
security settings
Provide a programming file with an
encryption key that matches that on the
device.
Run DEVICE_INFO action to verify that
the device has no security. If the device
does not have security, you cannot erase
it.
First program security with master
programming file, then program with user
encryption 1/2 field update programming
files.
You must first ERASE security with the
master security file, then you can
reprogram new security settings.
Bekijk gratis de handleiding van Microchip MPFS160TS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microchip |
| Model | MPFS160TS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10235 MB |
