Microchip MPFS160TLS handleiding
Handleiding
Je bekijkt pagina 17 van 61
FlashPro Express User Guide
16
Programmer Settings and Operations
Introduction
The FlashPro Express software enables you to connect multiple programmers to your computer. With each
programmer you select, you can connect the programmer, perform a self-test, customize, add, and remove and
analyze the JTAG chain, as shown in the figure below.
Figure 13 · FlashPro Express Right-Click Menu
Programmer Settings
In the Libero SoC Design Flow window, expand Configure Hardware, double-click Configure Programmer, or
right-click Configure Programmer and choose Programmer Settings to view the Programmer Settings dialog.
For the JTAG interface, you can set specific voltage and force TCK frequency values for your programmer in this
dialog. For the SPI Slave interface, you can set specific voltage and force SCK frequency values for your
programmer. SPI Slave mode is supported by FlashPro5 for SmartFusion2 and IGLOO2 devices, and by
FlashPro6 for SmartFusion2, IGLOO2, and PolarFire devices. SPI Slave mode is not supported for RTG4
devices. JTAG is the default interface.
Bekijk gratis de handleiding van Microchip MPFS160TLS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microchip |
| Model | MPFS160TLS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10235 MB |
