Microchip MPFS095TLS handleiding
Handleiding
Je bekijkt pagina 13 van 61
FlashPro Express User Guide
12
Figure 6 · Connecting a FlashPro5/4/3/3X Programmer
An independent thread processes the STAPL file during parallel programming. In an Microsemi test, parallel
programming is approximately five times faster than programming 16 devices sequentially.
Note: Microsemi has tested Belkin PCI-USB cards and hubs. We have found that parallel programming
works best with the vendor's latest driver installed and with the matching hubs.
Chain Programming Tutorial
This tutorial demonstrates how to use FlashPro Express to program a multi-device, multi-programmer chain. This
tutorial uses the production programming flow that exports a programming job from Libero SoC, which includes
chain configuration, programmer settings, and bitstream files for programming, and creates a job project from a
programming job.
The figure below shows the chain used in this tutorial. M2S050T is device 1 and A3P250 is device 3. Device 1 is
the first device to be programmed in the chain and device 2 is the last; device 3 is disabled and will not be
programmed.
Figure 7 · Chain Programming Devices
To program a chain:
1.
From the Project menu, choose New Job Project from FlashPro Express Job.
2.
Click Browse to load a Programming Job File, and specify your FlashPro Express job project location.
Click OK to continue, as shown in the figure below.
Bekijk gratis de handleiding van Microchip MPFS095TLS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microchip |
| Model | MPFS095TLS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10235 MB |
