Microchip MPF100TS handleiding
Handleiding
Je bekijkt pagina 12 van 36
Getting Started
Microchip UG0786 Revision 5 6
2.5 Handling the Board
Pay attention to the following points while handling or operating the board to avoid possible damage or
malfunction:
• Handle the board with electrostatic discharge (ESD) precautions to avoid damage. For information
about using the board with ESD precautions, see https://www.microchip.com/document-
portal/doc_view/126483-esd-appnote.
• Power down the board to switch between programming headers J17 and PCIe CONN (CON1).
2.6 Operating Temperature
A future version of this document will have information on this topic.
2.7 Powering Up the Board
The PolarFire Splash Board is powered up using either the 12 V DC jack or the PCIe connector.
To power up the board, connect the 12 V DC jack to the board.
Install the software required for developing designs and set the jumpers for the pre-programmed design.
For more information, see Installation and Settings, page 7.
Bekijk gratis de handleiding van Microchip MPF100TS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Microchip |
| Model | MPF100TS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5215 MB |
