Metra 99-5840CH handleiding

16 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 7 van 16
7
REV. 5/29/25 INST99-5840CH
7
AXXESS INTERFACE INSTALLATION
INTERFACE FEATURES
• Crimping tool and connectors, or solder gun, solder, and heat shrink
• Tape • Wire cutter • Zip ties
TOOLS REQUIRED
Connections to be made ..........................................................................................................8-9
Installation ..................................................................................................................................10
Programming ...............................................................................................................................11
Touchscreen display operation .............................................................................................12-13
Steering wheel control settings ........................................................................................... 14-15
Troubleshooting.......................................................................................................................... 16
INTERFACE COMPONENTS
TABLE OF CONTENTS
Provides accessory power (12-volt 10-amp)
Retains R.A.P. (retained accessory power)
Provides NAV outputs (parking brake, reverse, speed sense)
Retains audio controls on the steering wheel
Retains the factory backup camera
Retains balance and fade
Micro “B” USB updatable
Axxess interface (built into the touchscreen display)
5840 harness
HVAC interface
HVAC interface harness
16-pin harness with stripped leads
54-pin backup camera harness
4-pin harness with yellow RCA jacks
Female 3.5mm connector with stripped leads

Bekijk gratis de handleiding van Metra 99-5840CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkMetra
Model99-5840CH
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2040 MB