Metra 95-8275 handleiding
Handleiding
Je bekijkt pagina 3 van 4
REV. 2/27/2025 INST95-8275B
3
K IT A S S E M B LY
(Figure D) (Figure A)
(Figure E) (Figure B)
(Figure C)
1. Attach the hazard switch bracket to the
radio housing using the (5) #4 x 3/8”
Phillips screws supplied. (Figure A)
WARNING: DO NOT OVERTIGHTEN THE
SCREWS.
2. Clip the factory hazard switch assembly
into the hazard switch bracket/radio
housing assembly. (Figure B)
3. Attach the radio brackets to the radio
housing using the (4) #8 x 3/8” Phillips
screws supplied (Figure C)
4. Attach the radio to the radio brackets
using screws supplied with the radio.
(Figure D)
5. Attach the (5) panel clips to the radio
housing assembly. (Figure E)
6. Locate the factory wiring harness and
antenna connector in the dash, and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Re-connect the negative
battery terminal and test the radio for
proper operation.
7. Snap the radio housing assembly into
the dash and reassemble the dash in
reverse order of disassembly.
Bekijk gratis de handleiding van Metra 95-8275, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 95-8275 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 644 MB |
