Metra 95-7644B handleiding
Handleiding
Je bekijkt pagina 3 van 4
REV.4/10/25 INST95-7644B
3
1. Secure the radio brackets to the radio
trim panel using the Phillips screws
provided. (Figure A)
2. Secure the radio to the radio trim panel/
bracket assembly using the screws
supplied with the radio. (Figure B)
3. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using
the proper mating adapter from
Metra and/or Axxess. Reconnect the
negative battery terminal and test the
aftermarket radio for proper operation.
4. Snap the radio trim panel assembly onto
the the dash and reassemble the dash in
the reverse order of disassembly.
K IT A S S E M B LY DASH DISASSEMBLY (CONT.)
unit
4. Remove (1) Phillips screw securing the
passenger side A/C vent, then remove
the vent. (Figure E)
5. Remove (1) Phillips screw securing the
dash panel above the glovebox, then
unclip and remove the panel. (Figure F)
6. Remove (4) Phillips screw securing the
factory radio, disconnect the wiring, and
then remove the radio. (Figure G)
Continue to Kit Assembly
(Figure E)
(Figure F)
(Figure G)
(Figure A)
(Figure B)
Bekijk gratis de handleiding van Metra 95-7644B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 95-7644B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 690 MB |
