Metra 108-FD2B handleiding
Handleiding
Je bekijkt pagina 11 van 12
RE
V.
12/9/22
INST108-FD
2B
11
STEERING WHEEL CONTROL SETTINGS
(CONT.)
Select Radio
• To show which brand radio is “auto detected” to the interface, press the “Autodetect”
button. The radio detected will have a filled in circle. If the incorrect radio is shown,
select Pioneer.
Note: If the interface shows an Alpine radio, that means the interface does not detect a radio
connected to it, i.e., an open connection. Verify that the 3.5mm jack is connected to the correct
steering wheel jack in the radio.
TROUBLESHOOTING
Resetting the interface
Option # 1
1. With everything connected and the car running.
2. Hold the bottom (2) buttons for 3 seconds, then release. (Figure A)
(The screen will turn black and then put you in the vehicle selection screen)
3. Select your vehicle and wait till the “SWC Configured “ appears on the screen.
4. Turn ignition off and start vehicle, then test your interface.
Option #2
1. With the vehicle running, press the Reset Vehicle Type button mentioned in
System Configuration.
2. Refer to Programming, step 3, from this point.
(Figure A)
Bekijk gratis de handleiding van Metra 108-FD2B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 108-FD2B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1711 MB |
