Metra 108-FD1CH handleiding
Handleiding
Je bekijkt pagina 4 van 16
4
386.257.1187
|
MetraOnline.com
KIT PREPARATION
From the factory radio/climate control panel:
1. Unclip and remove the hazard switch
and traction control buttons.
To the 108-FD1CH radio trim panel:
1. Attach the hazard switch and traction
control buttons. (Figure C)
2. Attach the (7)
panel clips
provided.
(Figure D)
Continue to Kit Assembly
(Figure B) (Figure D)
(Figure A)
For 4.2-inch display screen models only,
and if SYNC
®
is desired to be retained:
1. Remove the (4) 9/32’ screws securing
the brackets from SYNC
®
module.
2. Attach the
SYNC
®
module brackets
to
the SYNC
®
module using the (4)
Phillips screws provided. (Figure A)
3. Secure the module into the lower
sub-dash using the factory hardware
removed in step 7 of dash disassembly.
(Figure B)
(Figure C)
Bekijk gratis de handleiding van Metra 108-FD1CH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 108-FD1CH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2113 MB |
