Metra 107-GM4B handleiding
Handleiding
Je bekijkt pagina 6 van 8
MetraOnline.com
6
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
1. Secure the display screen to the display
screen brackets using (6) screws
supplied with the radio. (Figure A)
Note: Reference the installation manual
provided with the radio for which
hardware to use. The display screen and
radio chassis use two different types of
screws.
2. Find a suitable location for the radio
chassis. Route the RGB extension cable
from the radio chassis to the display
screen, then connect it to the display
screen.
3. Place the display screen assembly into
the display screen housing, then secure
the entire assembly to the factory radio
panel using the factory screws.
(Figures B, C)
4. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio assembly. Metra recommends
using the proper mating adapter from
Metra and/or Axxess. Test the radio for
proper operation.
Note: Temporarily plug the climate
control panel back in during testing to
avoid vehicle errors codes.
5. Reassemble the dash in reverse
order of disassembly to complete the
installation.
Bekijk gratis de handleiding van Metra 107-GM4B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Metra |
| Model | 107-GM4B |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1074 MB |
