Mestic MC-200 handleiding
Handleiding
Je bekijkt pagina 12 van 55
Menu options
Image settings
1. Press the MENU button to enter the menu, you will see the icon selected in green by default.
2. Press MENU button again to confirm to enter picture setting as shown on the left.
3. Press + to select Camera 1 or Camera 2, then press MENU button to confirm.
4. Press + again to enter the submenu below, it will turn green.
5. Press MENU button to confirm, then press - or + to adjust the value. After the value is well
adjusted, press MENU button again to confirm the adjustment.
6. Then press + button to enter Brightness or other submenus to adjust the value. Repeat from
step 4 to step 5. When all the settings are done, press MODE to exit to return to the main
menu.
7. 6
th
option s for setting the mirror/non-mirror image.
Parking line settings
1. Press MENU button to enter menu, then press + button to move to Parking Line menu, press
MENU button to confirm and enter Parking Line setting menu as shown on the left.
2. Press + or - key to select Camera 1 or Camera 2, press MENU key to confirm. Press + to move
to M(meters) or ft(feet), press MENU to confirm.
3. Press + or - to select ON, then press MENU button to set as ON/OFF. Press + or - to select,
then press MENU to confirm. Then press + or - to move the parking line horizontally. Press the
MENU button to confirm the setting.
4. Press + to move to , then press MENU button to confirm to select. Then press + or - to move
the parking line vertically. Press the MENU button to confirm the setting.
5. Press + to move to , then press MENU key to confirm to select. Then press + or - to move the
parking line horizontally. Press the MENU button to confirm the setting.
6. Press + to move to , then press MENU key to confirm to select. Then press + or - to move the
number you want to adjust. Press MENU to confirm the selection, then press + or - to increase
or decrease.
7. When your setting is complete, press MODE to exit and return to the main menu. If the parking
line is set to ON, please also connect the trigger wire to the positive + of the rear light power.
When you put the car in reverse, the monitor will show the parking line. At this moment all
buttons will not work. After reversing the buttons will work.
Language settings
Press the MENU button to enter the menu , then press the + button to move to the
menu, then press the MENU button to confirm and enter the submenu. Press + or - to select the
language you prefer, then press MENU to confirm. Press MODE to exit.
Bekijk gratis de handleiding van Mestic MC-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mestic |
| Model | MC-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8499 MB |
