Mesko MS 4704 handleiding
Handleiding
Je bekijkt pagina 4 van 72
4
Power supply: 220-240V ~ 50/60Hz
Maximum allowable Worktime: 5 min
BEFORE FIRST USE
7. Collapsible tray 8. Slice thickness adjustment knob
5. Pusher guide 6. Food carriage
3. Blade 4. Food pusher
1. The ON switch and the lock button 2. Blade removal knob
DEVICE DESCRIPTION (Fig. 1, 2)
25. Do not remove the debris left on the blade when the device is plugged into the power
outlet.
24. Clean the slicer after each use.
23. Do not use the slicer to slice the following: dry bread, frozen foods, meat with bones,
fruit with hard seeds or products wrapped in aluminum foil or plastic.
22. Use the slicer only for slicing food.
22. When turning the slicer on, make sure that your left hand is correctly positioned on the
body and the ON button is correctly pressed.
21. Do not overload the device by using excessive amount of the sliced product or extreme
pushing.
20. Before you start, check if the blade is correctly installed.
19. Do not push small product with your hand. Use only the food pusher (Fig. 1, 4) to push
products.
18. Always unplug the power cord from the outlet before cleaning the slicer.
17. Slicer must be used with food carriage (Fig. 1, 6) and food pusher (Fig. 1, 4), unless
the size and shape of the sliced product makes it impossible.
16. Never block the OFF switch. This creates a risk of injury or damage to the device.
Maximum power: 400W
Nominal power:150W
TECHNICAL DATA
To remove the carriage (Fig. 1, 6) off the tray (Fig. 1, 7), slide the carriage towards you and take it off.
The body of the slicer houses the blade driver – never immerse the body in water or wash it under running water. The slicer body can be
cleaned with wet cloth with dishwashing detergent.
Re-attach the clean blade (Fig. 1, 3) to the body by inserting it into the blade recess and secure it by turning the blade removal knob (Fig.
1, 2) approximately ¼ turn to the left until you feel resistance.
USING THE SLICER
Place the product to be sliced on the food carriage (Fig. 1, 6). Place the food pusher (Fig. 1, 4) onto the pusher guide (Fig. 1, 5). Set the
slicing thickness by turning the knob (Fig. 1, 8) with your left hand. To turn on the slicer, simultaneously press the ON switch and the
lock button (Fig. 1, 1). With your right hand, push and move the product together with the carriage (Fig. 1, 6) away from you towards
the blade until the end of the carriage; then go back and repeat.
Set the slicer in the place where you can easily operate it, near a power outlet, making sure that that you are able to press the lock
button (Fig. 1, 1) with the fingers of your left hand and hold the product to be sliced or the food pusher (Fig. 1, 4) with your right
hand. The counter should be dry. The slicer must not move during use. Place the food carriage (Fig. 1, 6) with the assembled pusher
guide (Fig. 1, 5) on the collapsible tray (Fig. 1, 7), aligned with the notches.
Assemble the food carriage (Fig. 1, 6) with the pusher guide (Fig. 1, 5) as shown in Fig. 3.
When done, unplug the slicer from the power outlet.
CLEANING AND MAINTENANCE
Use extreme caution when removing, cleaning and inserting the blade. The blade is very sharp.
To remove the blade (Fig. 1, 3), turn the blade removal knob (Fig. 1, 2) approximately ¼ turn to the right, and remove the blade (Fig. 1,
3).
After each use, clean the slicer and wipe it dry.
Using the knob, set the slicing thickness to 0 mm. This setting prevents accidental access to the blade.
Bekijk gratis de handleiding van Mesko MS 4704, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Mesko |
| Model | MS 4704 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6357 MB |