Meridian 251 handleiding
Handleiding
Je bekijkt pagina 24 van 30
Meridian 251 Powered Zone Controller User Guide
19
Comms Type: For Comms-connected systems, ensures that
the appropriate set of commands is sent to the product. The
following categories are available:
1C = CD player, 2C = Radio, 3C = DVD player, 4C = Roon,
5C = Sonos. All others should be set to NC (No Comms).
Address: If there are two or more products of each type then
the address should be 1A for the first, 2A for the second, etc.
Works with Sonos
Sonos device: Shows the names and product types of all Sonos
products on the network. Select the Sonos device that should send
audio to the 251.
The 251 is not itself a Sonos streaming component. It must be
used with a Sonos Port or Sonos Connect. Both the Sonos S1
and S2 apps are supported.
Preferred source: Selects the source to be associated with
Sonos playback. On the Sources panel the same source should
be assigned to the audio input on the 251 that is connected to the
Sonos device.
Startup
Startup volume: Specifies the initial volume for the analogue
outputs and, if the 251 is a Controller, sent on Meridian Comms for
other connected products. The start volume is set when the 251 is
first powered up, and a few seconds after going into standby.
By default the 251 starts at volume 50 and retains the last
volume setting when it enters and leaves standby.
Startup source: Specifies the source that the 251 will
start with if the user has a Source key on their chosen user
interface.
State after power up: Set this to On to have the 251
playing the startup source when powered up.
Bekijk gratis de handleiding van Meridian 251, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Meridian |
| Model | 251 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3207 MB |
