Meridian 218 handleiding
Handleiding
Je bekijkt pagina 21 van 32
Meridian 218 Zone Controller User Guide
16
Configuring the 218 Zone Controller
The 218 contains a built-in web interface, allowing it to be
configured via the Ethernet connection using a standard web
browser.
Displaying the 218 configuration page
To display the 218 configuration page
Connect the 218 to a network.
Identify the IP address assigned to the 218 (see below).
Type this address into the address bar of a standard web
browser running on a computer or tablet on the same
network.
You should then see the Meridian 218 configuration
page. This allows you to see or change the 218 settings, or
reset them to their defaults, and also gives access to an online
version of this user guide.
Full details of each of the groups of settings are given in the
following sections.
To store the settings
After changing any settings click the Store Settings button
below the settings panels.
•
•
•
Restoring settings
Click the menu button at top left of the Meridian 218
configuration page.
Click Restore Settings.
For more information see
Restore Settings
, page 23.
Discovering the IP address of the 218
To discover the IP address of the 218 you can use any of the
following methods:
The Meridian Control app (see
Meridian Control app
, page
24) will automatically discover the 218 and link directly to the
218 configuration page.
Run the Meridian Device Manager program on a PC or
Mac connected to the same network as the 218.
Log in to the network router and view the list of attached
devices.
Use a network IP scanner to ‘ping’ a list of addresses on the
network.
•
•
•
•
•
•
Bekijk gratis de handleiding van Meridian 218, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Meridian |
| Model | 218 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3464 MB |
