Mellerware Mixy Black 1500 handleiding

Handleiding

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152/ 52

Afdrukken

Je bekijkt pagina 7 van 52

EN

Ensure the blade xing ring is xed

properly to the jar (by turning

counter clockwise) before putting

on the motor body. (Fig.1).

Place the jar onto to the motor unit

until it ts properly into place (Fig.2).

Put the ingredients, after having

rst chopped them into small

piece, into the jar with liquid (do not

exceed the maximum marker).

Put the lid on the jar; make sure it is

properly xed in place.

Put the cup in the lid.

Connect the appliance to

the mains.

The pilot light (I) comes on.

Turn the appliance on, by using the

selection knob.

If you wish to add more ingredients

pull out the cup.

Add the ingredients and replace

the cup.

To stop the appliance set the

speed back to “0”.

To avoid a erce, start up of the

fan, it is advisable to start o from

the lowest speed position and,

once the fan has been switched on,

progressively increase the speed to

the desired position.

ELECTRONIC SPEED CONTROL

The speed of the appliance can

be regulated by using the speed

regulator control (I). This function

is very useful, as it makes it

possible to adapt the speed of the

appliance to the type of work that

needs to be done.

ONCE YOU HAVE FINISHED USING

THE APPLIANCE

Stop the appliance, selecting

position 0 on the selector control.

Unplug the appliance from

the mains.

Lift the jar from the motor body.

Clean the appliance.

“PULSE / ICE CRUSH” FUNCTION

The appliance works in highest speed

to achieve optimal performance.

This function gives optimal result

for ice-crushing, up to desired

snowy level.

Turn the speed selector knob to the

left to operate the Pulse function (J).

We recommend working by turning

the knob in cycles of 3 seconds and

repeating the operation until you

obtain the desired result.

SAFETY THERMAL PROTECTOR

The appliance has a safety device,

which protects the appliance

from overheating.

If the appliance turns itself o and

does not switch itself on again,

disconnect it from the mains

supply, and wait for approximately

15 minutes before reconnecting.

If the machine does not start again

seek authorised technical assistance.

Cleaning

Disconnect the appliance from the

mains and allow it to cool before

undertaking any cleaning task.

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

–

12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152/ 52

Bekijk gratis de handleiding van Mellerware Mixy Black 1500, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Caratteristiche Prodotto

Andere merken in Blender