Melchioni MF 2503CEI handleiding
Handleiding
Je bekijkt pagina 21 van 73
20
Once the bracket is installed, always check, by applying manual force, that the fastening
is sufficiently secure to prevent accidental detachment of the appliance over time. The
bracket should remain immobile under a pull force of at least 60 kg. Additional safety
measures for installation are outlined in Chapter 2.
POSITIONING THE APPLIANCE
Remove the clip shown on the left in the image
and extract the cross pin. Select the shaft length
best suited to the ceiling height and pass the cable
through it. Re-insert the cross pin, making sure
the holes in the shaft align with those on the
appliance, then re-insert the clip and tighten the
screws to secure the shaft-appliance body
connection in place.
Hang the shaft-motor assembly in
the hollow spherical groove of the
bracket, then rotate the shaft until
the notch on the bracket aligns with
the slot along the sphere, as
illustrated.
1=groove
2=notch
Bekijk gratis de handleiding van Melchioni MF 2503CEI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Melchioni |
| Model | MF 2503CEI |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 8844 MB |
