Megger PAT250 handleiding
Handleiding
Je bekijkt pagina 8 van 42
www.megger.com
PAT250SX
8
Safety Warnings and Standards
2.2.1 PAT250SX Wireless Control Safety
When the PAT250SX is under wireless control pay attention to the warnings displayed on the wireless-control
device.
Keep the PAT250SX and the appliance under test in sight and within reach all the time during the test. Be aware
that some tests need to switch on the appliance under test. Make sure that it is safe for the appliance to operate
before initiating these tests.
Note that a wireless-control test may be aborted by pressing the red power button on the PAT250SX.
2.2.2 Installation category definitions:
Measurement equipment may be safely connected to circuits at the marked rating or lower. The connection rating is
that of the lowest rated component in the measurement circuit.
CAT IV - Measurement category IV: Equipment connected between the origin of the low-voltage mains supply and
distribution panel.
CAT III -Measurement category III: Equipment connected between the distribution panel and electrical outlets.
CAT II - Measurement category II: Equipment connected between the electrical outlets and user’s equipment.
The PAT250SX is rated CAT II 300 V
Ensure the equipment under test is properly secured and in a safe condition prior to running a 230 V AC leakage test
2.2.3 Product Safety Category
CAT II 300 V - MEASUREMENT CATEGORY II equipment connected between the electrical outlets and the user’s
equipment.
G
230 V AC powered Leakage testing: Connecting the PAT250SX to a 230 V AC supply will automatically
switch the leakage tests from a 40 V AC test to a mains powered 230 V AC test. Any leakage testing performed with
230 V AC connected will operate the equipment under test.
2.3 Safety, Hazard and Warning symbols on the instrument
This paragraph details the various safety and hazard icons on the instrument’s outer case.
Icon Description
F
Danger: Mains voltage present during testing.
G
Caution: Refer to user guide.
UK conformity. This equipment complies with current UK legislation.
EU conformity. Equipment complies with current EU directives.
Equipment complies with current ‘C tick’ requirements.
Do not dispose of in the normal waste stream.
Caution: Earth pins of the 230 V test socket will become hazardous if test lead P1 is in contact
with hazardous voltages during continuity test.
f
Fuse failure.
AA 1.5 V
Battery type fitted.
Do not connect to 230 V supply.
Caution: Earth pin of the 230 V test socket will become hazardous if test lead P1 is in contact
with hazardous voltages during continuity test.
Bekijk gratis de handleiding van Megger PAT250, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Megger |
| Model | PAT250 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7085 MB |
