Megger EVX100 handleiding
Handleiding
Je bekijkt pagina 19 van 24

www.megger.com EVX100
19
Specifications
7. Specifications
Power supply:
Internal battery: Li-ion 3180 mAH
Recharging: Type C USB (required supply is 5 V, 1 A maximum)
Charging status: LED
Input voltage
230 V AC nominal max 253 V AC
400 V AC nominal max 440 V AC
Input frequency: 50/60 Hz
CP state verification: A1, A2, B1, B2, C1, C2, E, F
For measurement specification refer to the MFT-X1 user guide. See megger.com/mft-x1
NOTE : Uses the Megger Confidence Meter to measure the supply source impedance of circuits
protected with an RCD rated ≥30 mA when there are only two connections possible. When a
neutral is available the three-wire test will provide a quicker, more accurate result.
NOTE : RCD may trip if there are high leakage currents in the circuit under test.
This measurement is immune to the effect of inductance found in some RCDs as it measures
resistance (RCD Uplift). EN61557-3 Measurement Range: 1.00 Ω to 1999 Ω
Connection options: Fixed type 2: IEC 62196-1
Safety: IEC61010-1:2010 61010-031:2015, CAT II 250 V
Temperature range:
Working range: -10 °C to +55 °C
Storage range: -25 °C to +70 °C
Humidity range: 90% R.H at +40 °C max
Ingress protection: IEC 60529: IP 54: Equipment is protected against
ingress of dust and water splashes and is suitable for
indoor and outdoor use.
Vibration: MIL-PRF-28800F: Class 2
Maximum operating altitude: 2000 m
Pollution degree: 2
Mechanical
EVX case dimensions: 133.5 x 115 x 56 mm (5.2 x 4.5 x 2.2 inches) excl. cable.
Unpackaged weight: 976 g
Packaged dimensions: 350 x 280 x 75 mm (13.8 x 11.02 x 2.96 inches)
Packaged weight: 1580 g
Cable length: 2 m
Bekijk gratis de handleiding van Megger EVX100, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Megger |
Model | EVX100 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 3687 MB |