Megasat Royal Line V 24 Smart Handleiding (120 Pagina's)

Handleiding

28 ENGLISH

8. Settings

This menu is used to set up cable reception (DVB-C). The available functions are similar to those for

aerial installation:

 Channel search: Starts the automatic search for analogue and/or digital cable channels.

 Digital manual installation: Enter a specic frequency or symbol rate to nd specic channels.

 Analogue manual installation: Manual search for analogue cable channels.

 Automatic channel search: Activates an automatic channel search at startup if new channels are

detected.

 LNC: Switches the LNC function for special cable systems on or o.

This menu is used for satellite reception (DVB-S/S2) and oers the most extensive setting options.

 Search for satellites: Here you rst select a provider (e.g. HD+). If you select „More“, a new window

opens in which you can manually select the desired satellite (e.g. Astra 19.2° East). Then specify the

scan mode (e.g. automatic scan, network search or blind scan) and the channel selection (only free

channels, all channels) and start the search process by clicking „Start“.

 Manual installation: All reception parameters can be set individually here:

- Satellite: Selection of the desired satellite (e.g. Astra 19.2° East).

- Connection type: Selection between No DiSEqC, DiSEqC 1.0/1.2, Unicable I/II.

- LNB frequency, 22 kHz, LNB voltage: Adaptation of technical values to your satellite system.

- Select transponder: Determines the frequency on which channels are searched for.

- Start channel search: Starts the search process with the selected settings.

 Automatic channel search: Activates the automatic detection and storage of new channels.

 LNC: Controls the low noise converter for satellite reception.

8.4.2 Cable installation

8.4.3 Satellite installation

Bekijk gratis de handleiding van Megasat Royal Line V 24 Smart, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.