Handleiding
Je bekijkt pagina 10 van 27
English
8
Connecting the Monitor
To start using the TFT monitor straight away, please read the "Safety and Precautions" section (page 2).
We recommend that you also read all the other sections as these contain detailed explanations and tips on how to
use your TFT display.
(Ill.: Rearside connectors)
• Ensure that the TFT monitor is not yet connected to the line power (power cord not yet plugged in) and nei-
ther the TFT monitor nor the computer is switched on.
• Prepare your computer for the TFT monitor if necessary with the correct settings for your TFT.
n Connecting Signal Cable
• Plug the data cable into the matching VGA connections on the computer and the monitor. If your PC also
has a DVI output, you can connect your monitor by means of the DVI-D connector.
Note
Even if you computer offers multiple connections, connect only one cable to avoid problems with the
signal detection.
o Connecting Audio Cable
• Plug the audio cable into the matching sockets on the computer and the TFT monitor.
p Connecting the Power Supply
• Plug the power supply cable into the power supply socket of the TFT screen and plug the electric plug into a
socket close to the TFT screen (same circuit).
• Your TFT monitor has an ON/OFF switch, by means of which you can switch the monitor on or off, on the
back. If the switch is set to 0, then no power is consumed. Set the switch to I and next switch your monitor on
using the on/off switch. Then switch on your computer.
Power
supply
VGA
connector
Audio con-
nector
Power
switch
DVI-D
connector
Bekijk gratis de handleiding van Medion Akoya P53003 (MD 30999), stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Medion |
| Model | Akoya P53003 (MD 30999) |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 3393 MB |
