Medel Air Mini handleiding
Handleiding
Je bekijkt pagina 14 van 86
14
•
If the mains cable of this device is damaged, the device must
be disposed of.
•
If the device is opened, there is a risk of electric shock. Dis-
connection from the power supply network is only guaranteed
if the mains plug is unplugged.
•
Modification of the device and atomiser set is not permitted.
•
If the device has been dropped, exposed to high levels of
moisture or suered any other damage, it must no longer be
used. If in doubt, contact Customer Services or the retailer.
•
The nebuliser may only be operated with compatible Beurer
atomisers and with the appropriate Beurer atomiser set. The
use of atomisers and atomiser sets made by other companies
may result in less ecient treatment and could damage the
device.
•
Keep away from children, pets and pests.
•
Do not modify the device.
•
Never operate the device during maintenance work. Mainte-
nance work includes servicing, inspection and repair.
IMPORTANT
•
Power cuts, sudden interference or other unfavourable con-
ditions could lead to the device becoming inoperable. We
therefore recommend that you obtain a replacement device
or medication (the latter should be agreed with your doctor).
•
Should you require an adapter or extension lead, this must
meet the applicable safety requirements. The power limit and
the maximum output specified on the adapter must not be
exceeded.
•
Never store the device or the mains cable near to sources
of heat.
•
Do not use the device in a room in which a spray has previ-
ously been used. Air the room before carrying out the treat-
ment.
•
Do not allow objects to get into the cooling vents.
•
Never use the device if it is making an abnormal sound.
•
For hygiene reasons, it is essential that every user uses their
own atomiser set.
•
Always disconnect the mains plug from the mains socket after
use.
•
Store the device in a location protected against climatic in-
fluences. The device must be stored in the environmental
conditions specified.
FUSE
•
The device is fitted with an overcurrent protection device. This
may only be replaced by authorised specialist personnel.
IMPORTANT
•
Only use the device
- on people
- for the purpose for which it is designed (aerosol inhalation)
and in the manner specified in these instructions for use.
•
Any form of improper use can be dangerous!
•
In the event of an acute emergency, providing first aid must
take top priority.
•
Apart from the medication, only use distilled water or a saline
solution. Other liquids may cause a fault in the nebuliser or
atomiser.
Prior to initial use
IMPORTANT
•
Remove all packaging material before using the device.
•
Protect the device from dust, dirt and humidity and never cov-
er the device while it is in use.
•
Do not operate the device in a very dusty area.
•
Switch the device o immediately if it is faulty or not working
properly.
•
The manufacturer is not liable for damage resulting from im-
proper or incorrect use.
•
This device is not intended for commercial or clinical use; it
is designed exclusively for self-treatment in a private home.
Repairs
•
Under no circumstances should you open or repair the
device yourself. If you do so, it may no longer function
correctly. Failure to comply with this instruction will void
the guarantee.
•
The device is maintenance-free.
•
For repairs, please contact Customer Services or an
authorised retailer.
5. DEVICE AND ATOMISER SET
DESCRIPTION
Nebuliser
The corresponding drawings are shown on page 3.
1
Mains connector cable
2
On/O control
3
Filter cap with filter
4
Hose connection
5
Holder for atomiser
Atomiser and atomiser set
6
Compressed air hose
7
Atomiser
8
Atomiser insert
9
Medication container
10
Mouthpiece
11
Adult mask
12
Children’s mask
13
Replacement filter
6. INITIAL USE
Setting up the device
Take the device out of the packaging. Place the device on a flat
surface. Make sure that the vents are free from obstructions.
Before using the device for the first time
Clean and disinfect the atomiser and atomiser set before
using them for the first time. See “Cleaning and mainte
-
nance” in this regard.
•
Connect the compressed air hose
6
to the bottom of the
medication container
9
.
A1
•
Connect the other end of the compressed air hose
6
to the
nebuliser hose connection
4
by turning it slightly.
A2
•
Insert the medication container
9
into the holder for the
atomiser
5
.
Mains connection
The device must only be connected to the mains voltage that is
specified on the type plate.
•
Insert the mains plug of the mains cable
1
into a suitable
socket.
•
To connect to the mains, fully insert the plug into the socket.
•
Ensure that there is a mains socket close to the set-
up area.
•
Arrange the mains cable so that no-one will trip over it.
•
To disconnect the nebuliser from the mains after in-
halation, first switch o the device and then pull the
mains plug out of the socket.
Bekijk gratis de handleiding van Medel Air Mini, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Medel |
| Model | Air Mini |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 13917 MB |