MDT SCN-P360D1.01 handleiding
Handleiding
Je bekijkt pagina 7 van 26
Technical Manual – Presence Detector SCN-P360D1.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Tel.: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
7
7
2.5 Settings at the ETS-Software
Selection at the product database:
Manufacturer: MDT Technologies
Product family: Presence Detectors
Product type: Ceiling
Medium Type: Twisted Pair (TP)
Product name: addicted to the used type, e.g.: SCN-PM360D1.01, Presence Detector 360° Ceiling CL
1 sensor
Order number: addicted to the used type, e.g.: SCN-PM360D1.01
The available parameters depend to the chosen product type. The additional functions for the plus
variant are not shown at the normal push buttons.
2.6 Starting up
After wiring the allocation of the physical address and the parameterization of every channel follow:
(1) Connect the interface with the bus, e.g. MDT USB interface
(2) set bus power up
(3) Press the programming button at the device(red programming LED lights)
(4) Loading of the physical address out of the ETS-Software by using the interface(red LED goes
out, as well this process was completed successful)
(5) Loading of the application, with requested parameterization
(6) If the device is enabled you can test the requested functions(also possible by using the ETS-
Software)
Bekijk gratis de handleiding van MDT SCN-P360D1.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-P360D1.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4454 MB |
