MDT SCN-LED55.01 handleiding
Handleiding
Je bekijkt pagina 26 van 34
Technical Manual
LED-Indicator SCN-LED55.01/SCN-GLED1x.01
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
26
26
4.5 Converter function
The following picture shows the menu “Converter function” in which the converter module A-D can
be activated:
Figure 17: Converter function
4.5.1 General settings
The following picture shows the general settings for the converter module:
Figure 18: Converter module -> general settings
The following table shows the available settings:
ETS-text
Dynamic range
[default value]
comment
Mode
▪ not active
▪ Byte=>Bit
▪ 2 Bit=>Bit
▪ Temperature-
value=>Bit
Setting of the Mode of the Converter:
not active: Converter module is
deactivated
other modes are described in the
following chapters in detail
Send behavior
▪ Send after output
change
▪ Send after input
change
Setting the sending behavior of the
output:
Send after output change: Sending at
every change of any input object
Send after input change: Sending only
at change of the output
Bekijk gratis de handleiding van MDT SCN-LED55.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-LED55.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6536 MB |
