MDT SCN-CO2MGS01.02 handleiding
Handleiding
Je bekijkt pagina 7 van 77
Technical Manual
CO2 / VOC Combi Sensor 55 [SCN-CO2MGS.02]
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
7
7
2.5 Commissioning
After wiring the unit, the physical address is assigned, and the application is programmed:
(1) Connect the programming interface with the bus, e.g. with MDT USB Interface.
(2) Switch-on bus voltage.
(3) Press the programming button on the side of the unit (red programming LED lights up).
(4) Loading the physical address from the ETS software via the interface (red LED goes out as
soon as this has been successfully completed).
(5) Loading the application, with desired parameterization.
(6) If the device is enabled, you can test the requested functions (also possible by using the
ETS-Software).
Bekijk gratis de handleiding van MDT SCN-CO2MGS01.02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-CO2MGS01.02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14681 MB |
