MDT SCN-CO2MGS.02 handleiding
Handleiding
Je bekijkt pagina 69 van 78
Technical Manual
CO2 / VOC Combi Sensor 55 [SCN-CO2MGS.02]
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
69
69
In PWM control, the controller switches the control value according to the value calculated in PI
control, considering the cycle time. The control value is thus converted into pulse width modulation
(PWM).
PWM cycle
The PWM cycle is used for PWM control to calculate the switch-on and switch-off pulse of the
control value. This calculation is based on the calculated control value. A PWM cycle comprises the
total time from the switch-on point to the new switch-on point.
Example:
If a control value of 75% is calculated with a set cycle time of 10 minutes, the control value is
switched on for 7.5 minutes and switched off for 2.5 minutes.
In principle, the slower the overall system, the longer the cycle time can be set.
Important: For PI control switching (PWM), the status can also be output as a percentage value.
The following communication objects are available for this:
Number
Name/Object function
Length
Usage
73
Temperature controller – Control value
Heating: Send status
1 Byte
Sends the status as a percentage
value
73
Temperature controller – Control value
Heating/Cooling: Send status
1 Byte
Sends the status as a percentage
value
74
Temperature controller – Control value
Cooling: Send status
1 Byte
Sends the status as a percentage
value
Table 69: Communication objects – Status control value
Bekijk gratis de handleiding van MDT SCN-CO2MGS.02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-CO2MGS.02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 0 MB |
