MDT SCN-CO2MGS.02 handleiding
Handleiding
Je bekijkt pagina 41 van 78
Technical Manual
CO2 / VOC Combi Sensor 55 [SCN-CO2MGS.02]
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
41
41
The associated communication objects are shown in the table:
Number
Name/Object function
Length
Usage
51
Air quality controller –
Lock controller
1 Bit
Locking the output stage
58
Air quality controller – Override
level, Override control value
1 Byte
Receive a value for override.
DPT according to set parameter
Table 27: Communication objects – Lock function
4.3.2.7 Send setpoint/output cyclically
This parameter is available for all adjustable controllers.
This setting causes the output to be sent cyclically on the bus.
The following figure shows the setting in the ETS:
Figure 21: Settings – Send setpoint/output cyclically
The following table shows the associated communication objects:
ETS-Text
Dynamic range
[Default value]
Comment
Send setpoint/output
cyclically
not active
1 min – 60 min
Setting whether to send and in which
cycle.
Table 28: Settings – Send setpoint/output cyclically
Bekijk gratis de handleiding van MDT SCN-CO2MGS.02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-CO2MGS.02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 0 MB |
