MDT SCN-CO2MGS.02 handleiding
Handleiding
Je bekijkt pagina 13 van 78
Technical Manual
CO2 / VOC Combi Sensor 55 [SCN-CO2MGS.02]
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
13
13
4 Reference ETS-Parameter
4.1 General Settings
The following figure shows the menu for the general settings:
Figure 3: General settings
The following table shows the possible settings:
ETS-Text
Dynamic range
[Default value]
Comment
Startup time
2 … 240 s
[2 s]
Sets the time between restart and
functional start-up of the device.
Send „Operation“ cyclically
not active
1 min – 24 h
Activation of a cyclic "in operation"
telegram.
Day/Night switchover
▪ not active
▪ active
Activation/deactivation of a
"Day/Night" object.
Value for Day/Night
▪ Day = 1 / Night = 0
▪ Day = 0 / Night = 1
Sets the polarity for the Day/Night
object.
Day/Night object after
bus power return
▪ no request
▪ request
Setting whether the object is to be
automatically requested when the
bus voltage returns.
Language diagnosis text
▪ German
▪ English
Setting the language of the diagnosis
text.
Table 5: General settings
Startup time
This time defines when the unit "boots up" after a restart (reset, reprogramming, bus voltage
recovery). This can be important if, for example, a bus reset is carried out. If there are many units
on a line, all units would start at the same time and load the bus. With a variable time, the units can
thus start differently.
„Operation“
"In operation" is used to show on the bus that the unit is "alive". If activated, an ON telegram is sent
cyclically.
Bekijk gratis de handleiding van MDT SCN-CO2MGS.02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-CO2MGS.02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 0 MB |
