MDT SCN-BWM55T.G2 handleiding
Handleiding
Je bekijkt pagina 55 van 67
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt-group.com
55 / 67
Technical Manual
Motion Detector/Automatic Switch 55/63 [SCN-BWM55/63(T)(06).x2]
State 07/2025 - Version 1.4
ETS Text
Dynamic range
[Default value]
Comment
Display “lock/forced
guidance ON” with green
LED
■ not active
■ active
Setting whether the green/red LED
should indicate the status (Light
channel 1 only) for forced guidance.
Display “lock/forced
guidance OFF” with red
LED
■ not active
■ active
Table 66: Settings – LED
LED white
ThewhiteLEDcanbeconguredasanightlight(orientationlight)asfollows:
■ active at “Night” and when motion (light channel x): In Night mode, the LED is switched via detection
ofthecorrespondinglightchannel.Valuecongurable.
■ active at “Night”, via external object “switch”: The LED can be switched in Night mode via the
associated1Bitobject.Valuecongurable.
■ always ON at “Night”:TheLEDisalwaysswitchedoninNightmode.Valuecongurable.
Note: If the white LED is active, the brightness value is not evaluated.
The following table shows the associated communication objects:
No. Name/Object function Length Usage
91 LED green – Switch 1 Bit The LED is controlled via an external object.
Only if “LED green” → “... via external object”.
92 LED red – Flashing 1 Bit The LED is controlled via an external object.
93 LED white – Switch 1 Bit The LED is controlled via an external object.
Only if “LED white” → „... via external object “switch”.
Table 67: Communication objects – LED
Bekijk gratis de handleiding van MDT SCN-BWM55T.G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | SCN-BWM55T.G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10289 MB |
