MDT BE-TAS86T.02 handleiding
Handleiding
Je bekijkt pagina 16 van 99
Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
16
16
4 Reference ETS-Parameter
4.1 Device-selection
Figure 3: Setting – Device selection
This selection determines which push-button is configured in the sequence. The two devices differ in
the proximity sensor (BE-TAS86 only). All other parameters are identical.
4.2 Operation / Display
4.2.1 General settings
The following picture shows available settings:
Figure 4: General settings
The following table shows the possible settings:
ETS-Text
Dynamic range
[Default value]
Comment
Send „In operation“
cyclically
not active
1 min – 4 h
Activation of a cyclic "in operation"
telegram.
Startup time
2 … 240 s
[2 s]
Sets the time between restart and
functional start-up of the device.
Bekijk gratis de handleiding van MDT BE-TAS86T.02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS86T.02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18349 MB |
