MDT BE-TAS55T4.01 handleiding
Handleiding
Je bekijkt pagina 35 van 89
Technical Manual – Push Button Smart 55/63
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
35
35
4.6.4.3 Subfunction: Toggle
Single-Button function
With the single button function: Switch - Sub-function: Toggle - the button sends the respective
inverted value in relation to the last received status value.
For this purpose, the "Status for toggle" status object is linked to the status of the actuator to be
controlled. If an ON signal was received as the last value, the push-button sends an OFF command to
the "Toggle" object the next time it is pressed.
The following figure shows the available settings:
Figure 16: Settings – Single-button function: Switch - Subfunction: Toggle
For details of the innovative group control, see 4.6.4 Switch.
The following table shows the available communication objects:
Number
Name
Length
Usage
0
Push button 1 – Toggle
1 Bit
Switching function of the button
1
Push button 1 –
Status for toggle/display
1 Bit
Status to update the push button; has to be
connected to the status of the actuator to be
switched so that the correct (inverted) value
is always transmitted
2
Push button 1 Group long: –
Toggle
1 Bit
Switching function of the button with long
keystroke
4
Push button 1 Group extra long: –
Toggle
1 Bit
Switching function of the button with extra
long keystroke
Table 25: Communication objects – Single-button function: Switch - Subfunction: Toggle
Bekijk gratis de handleiding van MDT BE-TAS55T4.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS55T4.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20559 MB |
