MDT BE-TAS5504.01 handleiding
Handleiding
Je bekijkt pagina 7 van 89
Technical Manual – Push Button Smart 55/63
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1
Phone: +49-2263-880 • Fax: +49-2263-4588 • knx@mdt.de • www.mdt.de
7
7
2.5 Commissioning
After wiring the device, the assignment of the physical address and the programming of the
application are following:
(1) Connect the programming interface with the bus, e.g. MDT USB Interface
(2) Set bus power up
(3) Press the programming key on the unit (status LEDs flash alternately red)
(4) Load the physical address from the ETS software via the interface (status LED goes out as
soon as this is successfully completed)
(5) Loading of the application, with requested parameterization
(6) If the device is enabled you can test the requested functions (also possible by using the ETS-
Software)
Bekijk gratis de handleiding van MDT BE-TAS5504.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAS5504.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 20559 MB |
