MDT BE-TAL5504.01 handleiding
Handleiding
Je bekijkt pagina 34 van 63
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
34 / 63
Technical Manual
Push Button Lite 55/63/Basic [BE-TALxxxx.x1]
State 09/2024 - Version 1.4
Action on long keypress
■ 1. - 4. Toggle value: A long button press always sends a xed toggle value (value corresponding to the
assigned toggle values).
■ 4. Toggle value if 1. Toggle value was previously set, otherwise 1. Toggle value: The setting sends the
1st switch value with each long button press. If the last switch value sent corresponds to the 1st switch
value, the 4th switch value is sent.
■ send “0”: The setting sends the value “0” to the toggle object. For example, if the datapoint type is set
to percent value, the value 0% is sent.
■ “OFF“ to second object: The value “OFF” is sent for the long button press on a 2. object.
■ “ON” to second object: The value “ON” is sent for the long button press on a 2. object.
■ save scene: The actual scene will be saved (Only if “Datapoint type” → “Scene”)
Switching type (only available with two-button function)
■ limit stop: With the switching type limit stop, the 4th toggle value is sent again after sending the 4th
toggle value.
■ overrun: With the overrun switching type, the 1st toggle value is sent again after the 4th toggle value.
Note: For the single-button function, this parameter is permanently set to “overrun”.
The following table shows the associated communication objects:
No. Name/Object function Length Usage
0 PB1: –
PB1/2: –
Forcible control, Percent value ...
Transmission of the toggle value.
DPT depending on the parameter setting.
1 PB1: –
PB1/2: – Status: Percent value ...
1 Byte
2 Byte
Receiving of the status.
Status for, Forcible control Scene number and
RGB value not available.
2 PB1 long: –
PB1/2 long: – Switch
1 Bit Switch function of the long button.
Only if “‘ON’/’OFF’ to second object”.
Table 18: Communication objects – Send values – Subfunction: Toggle values/scenes
Bekijk gratis de handleiding van MDT BE-TAL5504.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TAL5504.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9839 MB |
