MDT BE-TA55P4.G2 handleiding
Handleiding
Je bekijkt pagina 28 van 51
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt-group.com
28 / 51
Technical Manual
Push Button 55 / Plus 55 / Plus TS 55 [BE-TA55xx(06).x2]
State 07/2025 - Version 1.3
Parameter “Switching type” (only available with two-button function)
Limit stop: With the switching type limit stop, the 4th toggle value is sent again after sending the 4th
toggle value.
Overrun: With the overrun switching type, the 1st toggle value is sent again after the 4th toggle value.
Note: For the single button function, this parameter is permanently set to “overrun”.
The following table shows the available communication objects:
No. Name / Object function Length Usage
0 PB1:
PB1/2: –
Forcible control, Percent value…
Transmission of the toggle value.
DPT depending on the parameter setting
1 PB1:
PB1/2: – Status: Percent value…
Receiving of the status.
DPT depending on the parameter setting.
Status for RGB value, Forcible control and
Scene number not available
2 PB1 long:
PB1/2 long – Switch
1 Bit Switch function of the long button.
Only appears with the setting “ON or OFF to
second object”.t
Table 18: Communication objects – Send Values - Toggle values/scenes (up to 4 values)
Bekijk gratis de handleiding van MDT BE-TA55P4.G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TA55P4.G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7557 MB |
