MDT BE-TA55P2.G2 handleiding
Handleiding
Je bekijkt pagina 17 van 51
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt-group.com
17 / 51
Technical Manual
Push Button 55 / Plus 55 / Plus TS 55 [BE-TA55xx(06).x2]
State 07/2025 - Version 1.3
4.2 Button functions - General
The table shows the available settings:
ETS Text
Dynamic range
[Default value]
Comment
Buttons 1/2 (top left / right)
Buttons 3/4 (2. line left / right)
Buttons 5/6 (3. line left / right)
Buttons 7/8 (bottom left / right)
■ not active
■ single-button function
■ two-button function
Setting the functions for the
respective button pair
Reaction time on keypress ■ fast
■ medium
■ slow
Setting the reaction time or debounce
time for the buttons.
Time for long keypress
(Basic setting)
0,1 s – 30,0 s
[0,4 s]
Setting from when a long keypress is
detected.
Table 8: Settings – Button functions
It is determined in advance how a pair of buttons is to be activated and used.
With the “single-button function”, only one button is used for one function.
With the “ two-button function”, 2 buttons are always used for one function and the operating concept
works like a rocker. It is possible to specify for each button which value (on/off, up/down, brighter/darker,
etc.) it is to send.
A corresponding time can be set via “Time for long keypress (basic setting)”.
Note: This time is the basic setting for all buttons.
Bekijk gratis de handleiding van MDT BE-TA55P2.G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TA55P2.G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7557 MB |
