MDT BE-TA5508.G2 handleiding
Handleiding
Je bekijkt pagina 43 van 51
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt-group.com
43 / 51
Technical Manual
Push Button 55 / Plus 55 / Plus TS 55 [BE-TA55xx(06).x2]
State 07/2025 - Version 1.3
4.5.1.1 Settings Logic 1-4
If a logic is activated, the following settings are possible:
ETS Text
Dynamic range
[Default value]
Comment
Function/Object
description
free text
[up to 40 bytes allowed].
Text input for describing the logic
function and its objects.
Additional text free text
[up to 40 bytes allowed].
Text input for additional
information.
Object type ■ 1 Bit DPT 1.001 Switch
■ 1 Byte DPT 17.001 Scene number
■ 1 Byte DPT 5.005 Decimal value
(0...255)
■ 2 Bit DPT 2.001 Switch control
Setting the object type for the logic
output.
Value /
Scene number
any value according to DPT Setting of the value which is to be
sent when the logic operation is
fullled.
Only for object types “Scene”,
“Decimal value”, “Switch control”.
Sending condition ■ not automatic
■ on input telegram
■ on change of output
■ on change of output (send only “0”)
■ on change of output (send only “1”)
Setting the sending condition for
the output object.
Only for object type “Switch“.
Output inverted ■ not active
■ active
Setting whether the output signal is
to be inverted.
Only for object type “Switch“.
Table 39: Settings – Logic 1-4
Bekijk gratis de handleiding van MDT BE-TA5508.G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-TA5508.G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7557 MB |
