MDT BE-GTL20W.01 handleiding
Handleiding
Je bekijkt pagina 26 van 62
MDT technologies GmbH · Papiermühle 1 · 51766 Engelskirchen · Germany
Telephone: +49 (0) 2263 880 · knx@mdt.de · www.mdt.de
26 / 63
Technical Manual
Glass Push Button II Lite [BE-GTLxxx.x1]
State 09/2024 - Version 1.4
4.3.2.4 Subfunction: Send status
; Single-button function
With this function, xed values can be sent for a pressed button (rising edge) and a released button (falling
edge).
In addition, it is possible to set a delay for the released button. This means that the value for the pressed
button is sent immediately, but the value for the released button after a delay.
For example, a light can be switched on when the button is pressed, but the light remains on for a few
seconds after the button is released. This time is then left, for example, to leave a room without being in
the dark.
The following table shows the available communication object:
No. Name/Object function Length Usage
0 PB1: – Send status 1 Bit Switch function.
Table 15: Communication objects – Single-button function Switch – Subfunction: Send status
Bekijk gratis de handleiding van MDT BE-GTL20W.01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-GTL20W.01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 0 MB |
