MDT BE-GT20W.02 handleiding
Handleiding
Je bekijkt pagina 65 van 99
Technical Manual
Glass Push-button II Smart & Push-button Smart 86 [Series .02]
MDT technologies GmbH • 51766 Engelskirchen • Papiermühle 1 • Germany
Phone: +49-2263-880 • knx@mdt.de • www.mdt.de
65
65
2 Byte temperature shift
With the 2-byte temperature shift, the push-button sends a 2-byte temperature value which is added
to or subtracted from the set basic Comfort value.
Each time the button is pressed, the button sends the shift by the set increment.
To ensure that the display and the current setpoint are synchronous, the limits of the setpoint shift
must be specified in the push-button and set to the same values as in the controller to be controlled.
The following table shows the available communication objects:
Number
Name/Object Function
Length
Usage
0
F1/2: – Setpoint shift
2 Byte
Sends the Setpoint shift
1
F1/2: –
Status actual temperature
2 Byte
Receiving an external temperature for the display
of the current temperature - is only displayed if the
parameter "Use internal temperature value" is set
to "not active"
2
F1/2: –
Status current setpoint
2 Byte
Receiving the current setpoint temperature of the
temperature controller – to display the status
3
F1/2: –
Status setpoint shift
2 Byte
Reception of the current setpoint shift. Must be
connected to all 2-byte objects that send the
setpoint shift to the controller to be controlled in
order to correctly evaluate the current status of the
setpoint shift.
Table 48: Communication objects – Temperature shift via 2 Byte
Bekijk gratis de handleiding van MDT BE-GT20W.02, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MDT |
| Model | BE-GT20W.02 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 18349 MB |
