Handleiding
Je bekijkt pagina 16 van 24
16
Wi-Fi connection using an iOS Device
Setting up the DS200 as a AirPlay Speaker will
connect the DS200 to your Wi-Fi network:
• Make sure your iOS device is on the Wi-Fi
network you wish to connect the DS200 to
• With the DS200 powered on, the NETWORK
LED should not be solidly illuminated green (if it
were lit, it would indicate the DS200 is currently
connected to a network)
• Open up Settings on the iOS device
• Open up the Wi-Fi submenu
• Look at the Wi-Fi network list and nd “Set Up
New AirPlay Speaker”
• Select the DS200
• The DS200 will be added to your network
Ethernet
For a wired connection to your network, use an
Ethernet cable to connect the DS200 to your router.
Note: A solid red Network/Wi-Fi LED indicates that a
network error has occurred. See page 6.
Note that plugging in an Ethernet cable will disable
the Wi-Fi radio of the DS200. The DS200 will use
the Ethernet connection for all network activity. To
enable Wi-Fi, the Ethernet cable must be removed.
With an Ethernet connection, you can use the
DS200 browser interface to provide the DS200 with
your Wi-Fi settings. For more information, see “The
Browser Interface” on page 18.
Setting up Wi-Fi Without Ethernet
To initially connect your DS200 to a Wi-Fi network
without using an Ethernet connection or iOS con-
nection (as described above) follow these steps:
• Power the DS200 O and then On
• When the green LED below the Left Knob is
blinking, open your PC or phone’s Wi-Fi Con-
nection Settings
• Look for a network name starting with “softAP”
• Open a web browser (Chrome or Firefox)
• Type 192.168.255.249 in the browser’s address
bar and press enter and the DS200 interface
should open
• Select Settings from the DS200 interface
• Select Wireless in Network Type
• Select Start Scan
• Select your network
• Provide your password and press Connect
• Your DS200 will connect to your network
Google Cast
To Cast to your DS200, you will need:
• The latest version of Google Home App
• Wireless network and access password
With your mobile device/tablet connected to the
same Wi-Fi network as your DS200 and the DS200
powered on:
• Open the Google Home App
• Follow the steps for the DS200 if they automati-
cally appear
To manually add the DS200
• Tap the + at the top of the screen
• Select “Set up device”
• Select “Setup new devices”
• Follow the set up steps for a “Speaker”
Once the DS200 is setup, you can choose to Cast to
it. To Cast:
• Choose the Cast button in the top right corner of
a Google Cast-enabled app
• Choose the DS200
• When connected the Cast button will change
colors
• Cast music, etc. to your DS200
Quick Start (Other Connections)
Bekijk gratis de handleiding van McIntosh DS200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | McIntosh |
| Model | DS200 |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 4494 MB |