MBM LTD832S handleiding
Handleiding
Je bekijkt pagina 29 van 40
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31-(r05) Page 21 of 28
UK
7.7 Temperature and working hours display
It is possible to visualise washing and rinsing temperatures at any moment.
Simply keep button (2) pressed for a few seconds.
The display will show, in sequence, the washing temperature “t”, the rinsing temperature “b”, and the
machine hours of work “Hr”.
The message is displayed twice.
7.8 Limit switch device
The machine must work with a limit switch installed on the exit plane of the baskets (see installation
chapter).
The display will show the message “End” when a basket exiting the machine reaches the end of the
plane, and the conveyor stops until the basket is removed (Fig. 3).
Simply remove the basket from the end of the plane to restart the machine completely.
If the basket is not removed within a few minutes, the machine will switch off, in a succession, the rinsing
area, the washing area, the pre-wash area and, finally, the drying area, when installed.
7.9 Regulations
It is possible to regulate the temperature and the dispensing times.
With reference to Figure 7
Switch the machine off by pressing the line button (1) (Fig. 7/A)
Open the door of the machine (Fig. 7/B)
The display will show the message “door” (Fig. 7/C)
Keep buttons (1) and (2) simultaneously pressed for a few seconds. (Fig. 7/D)
The display will alternate messages “CH” and “0”.
Scroll through the numbers using buttons (3) and (4) until you reach “12”. (Fig. 7/E)
Press line button (1) (Fig. 7/F).
Select the parameter you wish to regulate by scrolling through the list with buttons (1) and (2) (Fig.
7/G).
The display will show, in sequence, the parameter and the set value (Fig. 7/H).
Use buttons (3) and (4) to set the desired value. (Fig. 7/I)
Once all regulations are concluded, keep the line button (1) pressed for a few seconds.
The new settings are now memorised and the display will show the message “- - - -” . (Fig. 7/M)
7.9.1 temperatures
It is possible to set the washing and rinsing temperatures of all washing programmes, with the exception
of the Glass programme.
Parameter
Programme rinsing temperature
range of regulation (° C)
b1
“SP1”
“oFF”,1,2…90
b2
“SP2”
b3
“AP1”
Parameter
Programme washing temperature
range of regulation (° C)
t1
“SP1”
“oFF”,1,2…70
t2
“SP2”
t2
“AP1”
Bekijk gratis de handleiding van MBM LTD832S, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MBM |
| Model | LTD832S |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5903 MB |
