MBM LTD832D handleiding
Handleiding
Je bekijkt pagina 34 van 40
DISHWASHER INSTRUCTIONS MANUAL
Page 26 of 28 MDIISY31-(r05)
UK
food residue, dishes and flatware should be left to soak before being put in the machine
Always select the wash programme and/or speed best suited to the type of items to be washed
Always wash glasses with clean wash water and, if possible, at the start of the shift or after changing
the water. Use the glasses cycle available on some models.
To wash crystal glassware, only use baskets with special compartments and water with conductivity
below 80 µS
If a corner configuration pre-wash is present, the trays must be loaded with any protruding parts
facing the direction of travel Fig.11
The machine is not designed for the continuous washing of predominantly large-sized items. The
latter may nonetheless be washed, in between the washing of other dishes and using suitable
baskets with tray supports.
The machine is not designed for washing baskets.
Incorrect loading or washing of large-sized items, for which the machine is not designed, may lead to
abnormal leaks into the drain, resulting in the partial emptying of the tanks. In this case, the machine
stops automatically and proceeds to refill with water until the correct level is restored. This may
occur several times over the course of service.
The baskets must be of a type suitable for the dishwasher's conveyor system and must be in good
condition, especially on the bottom. Use the baskets in the machine's equipment as a reference.
In the case of machines with corner configuration drying, trays must be placed in the dedicated
basket, leaving one out as illustrated in figure 10
Baskets sized 50x60 cm cannot be used.
Cap 8 MAINTENANCE
8.1 General rules
The machines are designed to minimise the need for maintenance. Carefully observe the rules below to
ensure the long working life of the machine and trouble-free operation.
In any case, there are a few general rules to follow to keep the machine in perfect working order:
keep the machine clean and tidy
avoid allowing temporary or urgent repairs to become a matter of routine
Strict observance of routine maintenance rules is extremely important; all machine parts must be
regularly checked to prevent problems and malfunctions from arising, thus reducing the time required
for any maintenance interventions.
Warning!
Before cleaning operations, disconnect the appliance from the power supply
Before cleaning, wear gloves with a minimum cut protection of 3 in accordance with EN388.
Cleaning the machine with products that contain chlorides in a concentration exceeding 50 ppm
can lead to corrosion of the machine's stainless steel structure.
Bekijk gratis de handleiding van MBM LTD832D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MBM |
| Model | LTD832D |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5903 MB |
