MBM LTD822D handleiding
Handleiding
Je bekijkt pagina 33 van 40
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31-(r05) Page 25 of 28
UK
7.13 End of washing operations
With reference to Figure 8
Stop the machine using the line button (Fig. 8/A)
Switch off the wall-mounted main switch (Fig. 8/B)
Open the doors, making sure they are firmly hooked to their supports. (Fig. 8/C)
Remove the horizontal filters, being particularly careful so as not to drop residues of food inside the
washing tank. (Fig. 8/D)
Lift the vertical filter and dispose of its contents. Use a hard brush to rinse the horizontal and the
vertical filters. (Fig. 8/D)
Slide out the overflow and allow the tank to drain. (Fig. 8/F)
Accurately wash the bottom of the tank with a jet of water.
Accurately wash the curtains.
Remove any traces of dirt from the empty tank. At this point only, remove the safety filter of the pump
and wash it under running water. (Fig. 8/G)
The external parts of the machine must be cleaned when their surfaces are cool, using a sponge and
non-foaming products that must be neither acid nor abrasive.
Reinsert the overflow devices, the safety filters and the tray filters.
The machine is now ready to use.
WARNING: Do not wash the machine with water streams or high-pressure water directly applied
to it, as any leaks into the electric components may compromise the regular function of the
machine and of its safety systems, annulling the warranty.
It is advisable to leave the doors open, to avoid the formation of unpleasant smells.
7.14 Positioning the dishes
With reference to figures 5,10 and 11
This dishwasher is designed for washing plates, glasses, flatware, kitchen utensils, trays and small
containers, always using specific 50x50 cm baskets which must be correctly loaded.
Place cups and glasses upside down in the flat baskets. Stem glasses must only be washed in
baskets with dividers which can be purchased separately fig. 5
Place plates in the plate basket specifically designed with support shafts, with the inner surface
facing upwards fig.5.
Place flatware and teaspoons in the cutlery basket with the handles pointing downwards. Wash the
various types together for optimum wash results fig.5.
Trays and chopping boards of a maximum size of 530x325x60 mm (gastronorm 1/1) may be
washed, using specific baskets without sides and inserts, loading them lengthwise in the direction of
machine travel fig.5 and 10
Recommendations:
Do not wash silver and stainless steel flatware in the same cutlery basket as this will tarnish the
silver and may corrode the stainless steel.
Always use the specific baskets designed for the various types of item to be washed (plates,
glasses, cups, flatware, trays etc.) fig. 5.
To save both detergent and electricity, only wash full, but not overloaded, baskets.
Avoid overlapping items.
To minimise maintenance, we recommend pre-cleaning items to be washed by removing left-over
food particles such as fruit peel plus toothpicks, olive pits etc, which could otherwise partly clog the
filter of the electro-pump, reducing wash performance and negatively affecting the quality of the final
results fig.5.
It is advisable to wash the dishes before food particles dry onto the surface. In the event of dried-on
Bekijk gratis de handleiding van MBM LTD822D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MBM |
| Model | LTD822D |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 5903 MB |
