MBM LTD821D handleiding
Handleiding
Je bekijkt pagina 59 van 150
DISHWASHER INSTRUCTIONS MANUAL
MDIISY31-(r01) Page 5 of 21
UK
Unpackaging and positioning
3.3
When the machine is received, open the packaging and check the machine and its accessories for
damage occurred during transportation. If any damages are detected, immediately report to the
transportation company and do not proceed with installation: seek the assistance of qualified,
authorised personnel.
The manufacturer cannot be held responsible for any damage occurred during transportation.
Packaging elements (plastic bags, Styrofoam, strips of wood, nails etc) must be kept away from the
reach of children, as they are potentially hazardous.
Position the machine according to the indications supplied by the general
installation layout, supplied separately, making sure its position is correct
regarding maintenance needs.
Screw the feet to the supports and place the machine in its proper position.
Adjust the height of the feet to level the machine. As these machines are long,
use a spirit level.
Warning:
While positioning the machine, do not drag it on the floor, as this may damage its
structure.
The floor must be dimensioned taking into consideration the overall weight of the
machine. The floor must be levelled.
Environmental conditions
3.4
• Environmental temperature: 40° C max/4° C min (average: 30°C)
• Altitude: up to 2,000 metres
• Relative humidity: Max 30% at 40° C/max 90% at 20° C
Cap 4 INSTALLATION
Electrical connections
4.1
• Caution! Installation must only be carried out by specialised
technicians!
• Prior to connecting the equipment, make sure that both the
voltage and frequency of the power grid correspond to those
indicated in the information plate on the lateral panel of the
machine.
• It is obligatory to connect the machine to the power grid by means
of a dedicated omnipolar switch, in conformity with the safety
regulations in force, of the automatic type, with fuses with at least
3 mm of opening between contacts. The above mentioned
switch, not supplied with the machine, must be installed on the
wall, in such a position that it can be easily reached, at a height
between 0.6 and 1.7 m.
• Prior to connecting the machine to the power grid, make sure the
power supply line is not live.
Bekijk gratis de handleiding van MBM LTD821D, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MBM |
| Model | LTD821D |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 21127 MB |
