MBM LK626 handleiding
Handleiding
Je bekijkt pagina 6 van 132
INSTRUCTION MANUAL FOR DISHWASHERS
Page 6 of 12
UK
Chap 4 USING THE MACHINE
4.1
Key and symbols
Referring to Fig.1:
1
ON/OFF BUTTON
4
DISPLAY INFORMATION
2
PROGRAMME SELECTION
BUTTON
5
STATUS BAR
(LED)
3
START BUTTON
4.2
Switching the dishwasher on
Referring to Fig.2
• Turn on the main power switch and open the external water tap.
• Check the presence of the overflow.
• Press ON/OFF (1).
• Loading begins automatically when the machine is switched on.
• The point on the display flashes until the level is reached.
• The STATUS BAR (5) lights up from the top downwards to indicate that the dishwasher is heating
up.
• When the working temperature is reached, the central led on the STATUS BAR (5) stays on, fixed.
• The optimal wash conditions have been reached.
4.3
Filling the rack
Referring to
Fig. 3
,
to ensure the correct operation of the dishwasher follow the rules described below:
• Use a suitable rack, fill without overloading and without overlapping the dishes.
• Always wipe the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer.
• Place the empty dishes in the rack facing downwards.
• Place plates and the like in the sloping rack, with the inner surface facing upwards.
• Place the cutlery in the cutlery basket, handle end down.
• Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.
• Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.
• Use only solid, dishwasher-proof dishes.
4.4
Cycle selection and start-up
• Press the PROGRAMME SELECTION
button (2) repeatedly to select a wash cycle that is suitable
for the dishes to be washed; the display will show the cycle number chosen (Fig. 4).
• To run the programme, press START (3); the STATUS BAR (5)
starts to flash, increasing from the
bottom upwards to indicate the progression of the cycle.
• When the cycle is completed, all the leds will come on, fixed ( Fig.5 ).
• For rapid drying, remove the rack from the machine as soon as the cycle finishes.
• To stop a wash cycle early, press START (3).
N.B. In hood versions, after the first work cycle the automatic start is automatically
enabled; the
subsequent cycles will be enabled automatically when the hood is closed. This operating mode
is marked on the display by “AS”.
Bekijk gratis de handleiding van MBM LK626, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MBM |
| Model | LK626 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 14912 MB |
