Handleiding
Je bekijkt pagina 8 van 132
INSTRUCTION MANUAL FOR DISHWASHERS
Page 8 of 12
UK
• Make sure the overflow has been removed.
• Close the door and switch the dishwasher on.
• Press the PROGRAMME SELECTION button (2) for the resin regeneration cycle; rEG
will appear
on the display.
• Press the START button (3) to start a cycle.
• The regeneration cycle lasts around 20 minutes.
• The dishwasher will switch off when the cycle has completed.
N.B. Do not switch off the machine if a regeneration cycle is underway
4.11 Displaying information
With the dishwasher on, press PROGRAMME SELECTION (2
) for five
seconds, in sequence the following are shown:
• “t” wash temperature
• “b” rinse temperature
•
“CC” wash cycles carried out during the life of the dishwasher.
4.12 List of viewable messages
Door open
Number of cycles carried out
Rinse temperature
End of cycle
Wash temperature
Automatic start enabled
Short wash
Continuous wash
Medium wash
Final drain
Long wash
Regeneration cycle or request
4.13 End of shift
• At the end of the day always drain the machine as described in the section Machine draining.
• Disconnect the power supply by means of the main switch and close the external water cock.
• Perform routine maintenance and clean the machine as described in the section Maintenance.
• If possible, leave the door ajar to prevent bad odours building up inside the machine.
Bekijk gratis de handleiding van MBM LB423P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MBM |
| Model | LB423P |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 15368 MB |
