MB Quart MBTAC-STG6A-20-23 handleiding
Handleiding
Je bekijkt pagina 31 van 35
Page 31 of 35
Amplier Installation
● Connect the power harness and
speaker harness to the
RA1-710.5-1 amplier.
● Slide the bottom amplier feet into
the groove on the amplier plate.
Then secure the amplier on the
top with (2) M4 x 10mm Philips
screws and (2) M4 at washers.
● Connect the RCAs to the amplier
in the following order:
Front Black RCA to Channel 1
Front Red RCA to Channel 2
Rear Black RCA to Channel 3
Rear Red RCA to Channel 4
Sub Black RCA to Channel 5
Sub Red RCA to Channel 5
● Fish excess wiring back into the
hole in the bottom of the pocket.
Then install the supplied techex
wire covering over the wires in
the bottom of the pocket.
Bekijk gratis de handleiding van MB Quart MBTAC-STG6A-20-23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MB Quart |
| Model | MBTAC-STG6A-20-23 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33651 MB |
