MB Quart MBTAC-STG6A-20-23 handleiding
Handleiding
Je bekijkt pagina 25 van 35
Harnessing Installation
● If you have the OEM headunit and
is factory amplied you will install
the correct PAC Audio interface
behind the radio.
2017 - 2019 uses AP4-TY12
2020 - 2023 uses AP4-TY13 R.2
● Connect the RCAs to the LOC,
PAC module or aftermarket
headunit. Then pass them from the
radio area to the passenger oor
area. If you are using the LOC then
you will only connect front and rear
RCAs to the module and one of the
sub RCA to the T-harness before
the LOC.
● Connect the blue remote wire
to the T-Harness, PAC module
or aftermarket headunit. Then
pass from the radio area to the
passenger oor area. On ’20 – ’23
non-JBL amplied vehicles, you will
not connect the REM wire.
Page 25 of 35
Bekijk gratis de handleiding van MB Quart MBTAC-STG6A-20-23, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MB Quart |
| Model | MBTAC-STG6A-20-23 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 33651 MB |
