MB Quart MBQG-STG3-1 handleiding
Handleiding
Je bekijkt pagina 11 van 29
Page 11 of 29
Harness Installation
● Zip tie rear speaker harness
along power harness in the center
console. If you have a four seat,
use extension harness to extend
to the back of the vehicle
● Remove fuse from the holder and
connect power wires to the bus
bar
Note
If you have the Pulse connector,
remove the ring terminal from
the orange wire and connect the
three position connector to plug
into an open spot on the Pulse
block
● Remove Delphi connector at
bullet and pass these wires along
with the amplier connector from
hood area to the inside through
the grommet
Bekijk gratis de handleiding van MB Quart MBQG-STG3-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MB Quart |
| Model | MBQG-STG3-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29540 MB |
