Maxview Roam Basecamp BASE/50 handleiding

Niet gecategoriseerd

Maxview

40 pagina's

PDF beschikbaar

Handleiding

Factory Reset

At any time, the Roam router can be reset to its factory settings using the reset button on the side of the router.

This will restore all settings on the router, including:

• Router SSID (network name) and password to those listed on the back of the router.

• Web User Interface to the username and password listed on the front of the router.

• All custom settings will be deleted, including any Wi-Fi connections you may have added.

Please see page 6 on how to access the router inside the antenna enclosure.

2. Hold for 6 seconds, until all of

the green LEDS on the side of the

router are on.

Once released all 5 signal strength

LED’s will flash together.

This indicates the start of the reset

process.

3. Allow 3 minutes for the router

to reset. Once reset the Wi-Fi

network will be visible and

available to connect to.

1. To complete the factory reset,

press and hold down the reset

button with the supplied pin

needle.

Note: If you don’t hold

long enough, the router

will restart but not reset.

Bekijk gratis de handleiding van Maxview Roam Basecamp BASE/50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.